Description
The Herm Sprenger prong collar is designed to provide maximum results without injury, and in order to do this, the collar must be the correct size for your dog. This is achieved through the use of extra links, each providing additional length to the collar for a perfect fit.
- Chrome plated
- For use with chrome-plated prong collars
- Available in four sizes
- No need for special tools
- Made in Germany
Manufacturer's Note
When ordering, ensure you are choosing the correct millimeter sized prong link in the same metal composition as your collar. This will maintain a consistent tensile strength throughout the collar, ensuring proper training communication and collar longevity.
Selecting the Correct Size
Wire Gauge
|
Link Length
|
Finish
|
Max Dog Weight
|
Use With...
|
2.2 mm (1/11")
|
1.2"
|
Chrome
|
66 lbs
|
Small HS Prong Collar
|
3.0 mm (1/9")
|
1.5"
|
Chrome
|
77 lbs
|
Medium HS Prong Collar
|
3.25 mm (1/8")
|
1.5"
|
Chrome
|
88 lbs
|
Large HS Prong Collar
|
4.0 mm (1/6")
|
2"
|
Chrome
|
154 lbs
|
X-Large HS Prong Collar
|
Additional Information
Additional Information
How to Add /Remove Links From a Prong Collar
- Select which link you would like to remove.
- Slide the link toward the end of the prongs.
- Squeeze the prongs together allowing the looped end to slide off.
- Add or remove links as needed to correctly size your collar.
When adding and removing prong links, remember to keep the same number of prong links affixed on each side of the center plate. If the collar fitting requires an odd number of prong links, then make sure one side of the center plate has only one more prong link than the other side. Your goal is to ensure the center plate stays at the front of the dog's neck above the trachea.