Description
The Show Tech Experto Fine 5-in-1 Titanium Enhanced Blade features a 440C stainless-steel lower blade and an ultrafine ceramic upper blade with titanium coating. The ceramic blade ensures a low heat transfer and less friction, allowing for longer, and faster, clipping while reducing the risk of clipper burns and skin irritation. This 5-in-1 Fine blade is ideal for detailed clipping or finishing.
The innovative technology used to coat the ceramic with titanium provides a blade that will stay sharp much longer than traditional blades. The ultrafine blade allows you to perform precision detailing, finishing work, or complex styling on fine coats. Using the lever located at the bottom of the blade, you easily adjust and choose between five different clipping lengths including 0.25 mm, 0.5 mm, 1 mm, 1.5 mm and 2 mm.
- Allows groomer to execute detailed clipping and a precise, smooth finish even on fine coats
- Lower blade made of 440C stainless steel
- Upper blade made of ceramic with titanium coating
- Adjustable cutting lengths include 0.25 mm(#40), 0.5 mm(#30), 1 mm(#15), 1.5 mm(#10) and 2 mm(#9)
- Compatible with the Show Tech Experto, Wahl Arco, Wahl Bravura, Wahl Chromado, the Wahl Creativa, Wahl Figura, Wahl Motion Clippers, Andis Pulse Li 5 and Supra Li 5 clippers
- Blade width is 45 mm or 1.8"
NOTE: Are you working with thicker, wooly coats? Then the Show Tech medium blade is a better choice.
NOTE FROM THE MANUFACTURER: With Experto shaving head blades, you will enjoy a smooth, effortless shaving experience. Made with high-quality materials that ensure a long-lasting and sharp performance. However, when the blade starts to lose its sharpness, it's time to purchase a new one as it's not possible to sharpen this blade.
Additional Information
Instructions
Blade Removal
Hold the clipper face up with one hand and press down on the teeth at the top of the blade using your thumb until the blade it is unclicked. Hold out your other hand and use it to catch the blade and to avoid dropping it.
Blade Installation
Hold the clipper face down with one hand and align the bottom of the blade with the middle of the recess at the back of the clipper. Make sure that the lever at the bottom of the blade comes over the clipper. Push the centre and upper part of the blade down until it snaps into place.
Blade Cleaning and Oiling
Cleaning: Press and hold the top of the blade. Use the cleaning brush to remove hair from between the upper and lower blades.
Oiling: Use 1 to 2 drops of the lubricating oil on the 5 points shown on the picture below.
Note: Do not detach the blade spring while maintaining to avoid malfunctioning.